Find Ptfe Adhesive Tape, Fiberglass With Ptfe Coated Fabric, Ptfe Fabric on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > Others > Blow Film Rotational Moulding Grade Virgin Polypropylene PP/ABS/HDPE/LDPE/LLDPE Plastic Resin Gruanle Powder Pellet

Blow Film Rotational Moulding Grade Virgin Polypropylene PP/ABS/HDPE/LDPE/LLDPE Plastic Resin Gruanle Powder Pellet

Product Description

Material: Polyethylene/PE Plastic Properties After Heated: Thermoplastic Plastics Usage: General Plastics 1. Basic information:
Products name: LLDPE granules, LLDPE resin, LLDPE raw material, Liner Low Density polyethylene
Virgin lldpe powder, lldpe rotational molding powder Grade: Virgin Grade, or recycled Grade
Cas Code: 9002-88-4
Density: 0.91~0.93

2. Application

1) For production of film, technical items for pipes, fittings, and packing means.
2) For extrusion packaging film, rope, woven bags, fishing nets, water pipes; Injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box;
3) extrusion blow molding containers, hollow products, bottles.

3. Packing &Shipping
1 Packing: 25kg/pp bag, 25kg/paper bag, 1000kg/jumbo bag, 500kg/super sack
2 Loading: 17mt per 20 foot container
3 Loading Port: Any China Port
4 Lead time: 20days
Melt Flow Index g/10min ≤1.0
Density g/cm3 ≤0.945
Tensile strength  Mpa ≥14.0
Elongation at break % ≥600
Brittle temperature at low temperature °C ≤-76
ESCR ,FO H ≥500
Carbon Black dispersion -- --
Tensile strength after thermal aging  Mpa ≥13
Elongation after thermal aging % ≥500
Dielectric strength Mv/m ≥25
Volume resistivity Ω.m ≥1*1014
change rate of tensile strength 
after weather aging environment of 0--1008h
% ±25
change rate of elongation
 after weather aging environment of 0--1008h
% ±25
change rate of tensile strength
 after weather aging environment of 504--1008h
% ±15
change rate of elongation
after weather aging environment of 504--1008h
% ±15
  Rotational Molding Grade for Tank Use
Tests Value Unit
Melt Flow Rate (MFR) 3.2 g/10min
Density 0.939 g/cm3
Melting Point 127 °C
Tensile Yield Strength 21 Mpa
Tensile Strength at Break 28 Mpa
Elongation at Break 1,100 %
Flexural Modulus 750 Mpa
Brittle Temperature <-60 °C

Contact us if you need more details on Plastic Material. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Hdpe、Lldpe. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Others

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters