Hydroxyethyl Cellulose/HEC
Basic Info
Model No.: CMAX-HEC
Product Description
Model NO.: CMAX-HEC Classification: Chemical Additives Appearance: Powder Viscosity: 10000-200000 Origin: Shandong Efficacy: for Industrial Type: Thickeners Color: White Trademark: CMAX Hydroxyethyl Cellulose (HEC)
Brief introduction:
HEC is a series of non-ionic soluble cellulose ethers, which can be dissolved in hot and cold water, and has the characteristics of thickening, suspending, adhesive, emulsion, film coating and super absorbent polymers protective colloid, which is widely used in paints, cosmetics, oil drilling and other industries.
Physical and chemical index:
ItemSpecification
CAS NO. 9004-62-0
Appearancewhite or light yellow powder
Loss on drying≤ 5.0%
PH5.0-8.0
D. S. 1.8-2.5
Viscosity300cps-150000cps, 2% solution
Application Guide for the coatings industry:
High thickening effect
HEC provides excellent coating performance for the latex coating, especially the high Pvc Coating. There is no flocculation when the paint is thick paste.
HEC has a higher effect of thickening, can reduce the dosage to improve the economic effectiveness of formulation, while improving the washability of the coating.
Excellent rheological properties
HEC's aqueous solution is non-Newtonian system, the performance of the solution called thixotropy.
In the stationary state, the product is completely dissolved, the best coating system to maintain shape and cans thickening state.
In the tilting state, the system will maintain moderate viscosity, make the product equipped with excellent liquidity, and will not splash.
During the brushing and roller coating, the product is easy to spread on the base material, which will facilitate the construction. At the same time, have a good performance on anti-splash.
Finally, when the paint coating is completed, the system viscosity can immediately resume, and the coating will be sagging at once.
Dispersion and solubility
HEC is dissolved after a delay in processing, in the case of dry powder added, can effectively prevent caking. Ensure that HEC powder begin to hydration after fully dispersed.
After proper surface treatment, HEC can adjust the dissolution rate and viscosity increasing speed well.
Storage stability
HEC has good bio-stability, provide sufficient time for the paint store. Effectively prevent and pigments and filler sedimentation.
Coating industry recommend:
SpecificationViscosity (2% solution, 25c)
CMAX-300S240-360mPa. S
CMAX-6000S4800-7200mPa. S
CMAX-6000SE4800-7200mPa. S
CMAX-40000S32000-48000mPa. S
CMAX -40000SE32000-48000mPa. S
CMAX -600000S48000-72000mPa. S
CMAX -600000SE48000-72000mPa. S
CMAX -100000S80000-120000mPa. S
CMAX -100000SE80000-120000mPa. S
CMAX -150000S120000-180000mPa. S
CMAX -150000SE120000-180000mPa. S
Remark: S — > Surface treatment, SE — > Enzyme resistance
Oil industry Application Guide:
Application in oilfield cementing and oil drilling industries
HEC thickening agent can be used as thickner of the well workover fluid and cementing agent. Help to provide clarification of the low fixed content solution, thus greatly reducing the structural damage to the wells. The liquid thickening by Hydroxyethyl Cellulose can be easily decomposed by acids, enzymes or oxidants, greatly improving the ability to recover hydrocarbons.
Fluid in the well, HEC is used as proppant carrier. These liquids can be easily cracked through the process.
HEC configuration using drilling fluid, based on its low solids content, can effectively increase drilling stability. These properties can be used to inhibit the fluid medium to high hardness of the rock and heavy shale or shale drilling.
Reinforcement in the cement operations, HEC can reduce the hydraulic friction, minimize the loss of rock andwater loss.
Oil industry use recommended:
SpecificationViscosity (2% solution, 25C)Application
CMAX-300DR240-360mPa. SCementing
CMAX-100000DR80000-120000mPa. SOil drilling
CAMX-150000DR120000-180000mPa. SOil drilling
Remark: DR — > Oil drilling grade Contact us if you need more details on Hpmc. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Hydroxypropyl Methylcellulose、Hec. If these products fail to match your need, please contact us and we would like to provide relevant information.
Brief introduction:
HEC is a series of non-ionic soluble cellulose ethers, which can be dissolved in hot and cold water, and has the characteristics of thickening, suspending, adhesive, emulsion, film coating and super absorbent polymers protective colloid, which is widely used in paints, cosmetics, oil drilling and other industries.
Physical and chemical index:
ItemSpecification
CAS NO. 9004-62-0
Appearancewhite or light yellow powder
Loss on drying≤ 5.0%
PH5.0-8.0
D. S. 1.8-2.5
Viscosity300cps-150000cps, 2% solution
Application Guide for the coatings industry:
High thickening effect
HEC provides excellent coating performance for the latex coating, especially the high Pvc Coating. There is no flocculation when the paint is thick paste.
HEC has a higher effect of thickening, can reduce the dosage to improve the economic effectiveness of formulation, while improving the washability of the coating.
Excellent rheological properties
HEC's aqueous solution is non-Newtonian system, the performance of the solution called thixotropy.
In the stationary state, the product is completely dissolved, the best coating system to maintain shape and cans thickening state.
In the tilting state, the system will maintain moderate viscosity, make the product equipped with excellent liquidity, and will not splash.
During the brushing and roller coating, the product is easy to spread on the base material, which will facilitate the construction. At the same time, have a good performance on anti-splash.
Finally, when the paint coating is completed, the system viscosity can immediately resume, and the coating will be sagging at once.
Dispersion and solubility
HEC is dissolved after a delay in processing, in the case of dry powder added, can effectively prevent caking. Ensure that HEC powder begin to hydration after fully dispersed.
After proper surface treatment, HEC can adjust the dissolution rate and viscosity increasing speed well.
Storage stability
HEC has good bio-stability, provide sufficient time for the paint store. Effectively prevent and pigments and filler sedimentation.
Coating industry recommend:
SpecificationViscosity (2% solution, 25c)
CMAX-300S240-360mPa. S
CMAX-6000S4800-7200mPa. S
CMAX-6000SE4800-7200mPa. S
CMAX-40000S32000-48000mPa. S
CMAX -40000SE32000-48000mPa. S
CMAX -600000S48000-72000mPa. S
CMAX -600000SE48000-72000mPa. S
CMAX -100000S80000-120000mPa. S
CMAX -100000SE80000-120000mPa. S
CMAX -150000S120000-180000mPa. S
CMAX -150000SE120000-180000mPa. S
Remark: S — > Surface treatment, SE — > Enzyme resistance
Oil industry Application Guide:
Application in oilfield cementing and oil drilling industries
HEC thickening agent can be used as thickner of the well workover fluid and cementing agent. Help to provide clarification of the low fixed content solution, thus greatly reducing the structural damage to the wells. The liquid thickening by Hydroxyethyl Cellulose can be easily decomposed by acids, enzymes or oxidants, greatly improving the ability to recover hydrocarbons.
Fluid in the well, HEC is used as proppant carrier. These liquids can be easily cracked through the process.
HEC configuration using drilling fluid, based on its low solids content, can effectively increase drilling stability. These properties can be used to inhibit the fluid medium to high hardness of the rock and heavy shale or shale drilling.
Reinforcement in the cement operations, HEC can reduce the hydraulic friction, minimize the loss of rock andwater loss.
Oil industry use recommended:
SpecificationViscosity (2% solution, 25C)Application
CMAX-300DR240-360mPa. SCementing
CMAX-100000DR80000-120000mPa. SOil drilling
CAMX-150000DR120000-180000mPa. SOil drilling
Remark: DR — > Oil drilling grade Contact us if you need more details on Hpmc. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Hydroxypropyl Methylcellulose、Hec. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Others
Other Products
Hot Products
Density 48*46 Ends/Inch Window Blind Components Solar Shade Fabrics for BusinessPlastic Grass PaverE/C-Galss Fiberglass MeshPVC Coated Polyester Geogrid12mm Micro PP Polypropylene Fiber Virgin Monofilament PP Fiber Asphalt Concrete Fiber,Bitumen Coated Fiberglass Geogrids Composite with GeotextilePP, HDPE Uniaxial Geogrids for Roadbed with High Tensile Strength, GeoridHDPE 3D Composite Drainage Geonet, Three-Dimension Compound Drainage NetGeomat, Green Mat, 3D Geomat, Geomat for Slope Protection and Erosion ControlHDPE Geocell Price Used in Road Construction for Slope ProtectionHDPE Pond Liner GeomembranePVC Waterproof Membrane with Reinforced Polyester FiberGcl for Construction and Real Estate/Landfill/Man-Made Lake/PoolBitumen Coated Fiberglass Geogrid 50/50kn/M for Asphalt ReinforcementPolypropylene Biaxial Geogrid for RoadHigh Way Road Construction Geotextile